Specification Sheet

1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone] • Visit us at www.acuitybrands.com/juno-recessed
Printed in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 03/01/17
1 of 3
Project:
Fixture Type:
Location:
Contact/Phone:
6” IC NEW CONSTRUCTION HOUSING
IC23 LEDT24
COMPATIBLE WITH
J6RL & J6RLE 600, 900 LUMEN SERIES,
J6RL (WD) & J6RLE (WD) SERIES,
6RLD SERIES
G1.5.36
PRODUCT DESCRIPTION
IC Air-Loc
®
New Construction Housing for use with Juno retrofit
LED trim modules • Energy efficient, sealed housing • Can be
completely covered with insulation • Fully sealed housing stops
exfiltration of air, reducing heating and air cooling costs without
the use of additional gaskets.
PRODUCT SPECIFICATIONS
Electrical Connections Features non-screw base 120V plug-in
connector • Compatible with Juno retrofit LED trim modules
Labels U.L. listed for U.S. and Canada for through-branch
wiring and damp locations • Meets high efficacy requirements of
California T24
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Specifications subject to change without notice.
INSTALLATION
Real Nail 3 Bar Hangers Telescoping Real Nail
®
3 system covered
under US Patent D552,969
permits quick placement of housing
anywhere within 24” O.C. joists or suspended ceilings • Integral
T-bar notch and clip secures housing in suspended ceiling grid –
no accessory clips required • 24” expansion stop allows quick
placement of fixture in standard grid spacing • Bars scored in two
locations for fast, clean breaking, allowing housing installation
in tight applications • Bars captive to mounting frame • Edge-
mounted for extra strength • Captive bugle-headed ring shank
nail for quick one-step installation and easy removal with claw
hammer for fixture relocation • Quick-Loc slot (location identified
on the mounting frame) and oversized locking set screw lock
fixture in position • Bar hanger foot contoured to align to bottom
of construction joist • Alternate mounting holes included.
Junction Box Pre-wired junction box provided with (5) ½” and
(1) ¾” knockouts, (4) Non-metallic sheathed cable connectors
and ground wire, U.L. and cULlisted for through-branch wiring,
maximum 8 No. 12 AWG 90˚ C branch circuit conductors
(4 in, 4 out) • Junction box provided with removable access
plates • Knockouts equipped with pryout slots • Push-in electrical
connectors supplied as standard for fast, secure installation.
Mounting Frame 22-gauge die-formed galvanized steel
mounting frame • Rough-in section (junction box, mounting frame,
housing and bar hangers) fully assembled for ease of installation
• Sight lines embossed on mounting frame to allow for easy
viewing when aligning fixtures.
Housing IC aluminum housing, sealed for Air-Loc Compliance
• Housing is vertically adjustable to accommodate up to a 1”
ceiling thickness.
DIMENSIONS
6 7/8” CEILING CUTOUT
7 1/8”
7 1/2”
13 1/2”
Will expand
to 25”
(Reduces to 8 1/2”
with breakaway
feature)
13 1/8”
9 1/2”
PRODUCT CODES
Catalog Number Input Voltage
IC23
6" Incandescent No Plate New Construction IC Hsg 120V
Housing and trim can be ordered together or separate, but will always ship separately.