Specification Sheet

Project:
Fixture Type:
Location:
Contact/Phone:
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone] • Visit us at www.acuitybrands.com/juno-recessed
Printed in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 03/01/17
1 of 2
G2.1.0
5” UNIVERSAL
IC HOUSING
INCANDESCENT LAMPS
IC20 SERIES
13 1/2"
Will expand to 25"
(Reduces to 8 1/2"
with breakaway
feature)
7 1/2"
Real Nail 3
Real Nail 2
(S option)
PRODUCT DESCRIPTION
IC Air-Loc
®
Housing • Energy efficient, sealed housing • Can be completely
covered with insulation • When used with Air-Loc Gasket accessory or
pre-installed gasket, stops infiltration and exfiltration of air, reducing heating
and cooling costs • Trims shown with Air-Loc symbol do not require
a gasket.
PRODUCT SPECIFICATIONS
Lamp Lamp ratings based on trim selected–see page 2.
Socket Medium base porcelain with nickel-plated copper screw shell
• Drop socket with spring to accommodate certain trim installation.
Trims Trim selection shown on reverse.
Labels UL listed for through-branch wiring, damp locations and IP
• Product thermally protected against improper use of lamps • Union made
• UL Listed/CSA certified • Trims 210N, 211 and 212N are wet location
approved for covered ceiling applications • Trims 215 and 216 are wet
location approved for covered ceiling applications, when used with
outdoor rated lamps.
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Specifications subject to change without notice.
INSTALLATION
Real Nail
®
Bar Hangers Telescoping, Patented (US Patent D552,969)
Real Nail 3 and Real Nail 2 systems permits quick placement of housing
anywhere within 24” O.C. joists or suspended ceilings • Bars scored in
two locations for fast, clean breaking, allowing housing installation in tight
applications • Bars captive to mounting frame • Edge-mounted for extra
strength • Quick-Loc slot (location identified on the mounting frame) and
oversized locking set screw lock fixture in position • May be installed either
perpendicular or parallel to junction box.
Real Nail 3 Bar Hanger Integral T-bar notch and clip secures housing in
suspended ceiling grid – no accessory clips required • 24” expansion stop
allows quick placement of fixture in standard grid spacing • Captive bu
-
gle-headed ring shank nail for quick one-step installation and easy removal
with claw hammer for fixture relocation • Bar hanger foot contoured to align
to bottom of construction joist • Alternate mounting holes included.
Real Nail 2 Bar Hanger (S options) Small bar hanger foot designed to
install directly on strapping construction material • Features Real Nail
captive nail system for quick one-step installation • G2405 accessory clips
required for suspended ceiling installation.
Junction Box Pre-wired junction box provided with (5)
1
⁄2” and (1)
3
⁄4”
knockouts, (4) Non-metallic sheathed cable connectors and ground wire, UL
listed/CSA certified for through-branch wiring, maximum 8 No. 12 AWG
90˚ C branch circuit conductors (4 in, 4 out) • Junction box provided with
removable access plates • Knockouts equipped with pryout slots
• W options are supplied with push-in electrical connectors for fast
installation.
Mounting Frame 22-gauge die-formed galvanized steel mounting frame
• Rough-in section (junction box, mounting frame, housing and bar hangers)
fully assembled for ease of installation • Sight lines embossed on mounting
frame to allow for easy viewing when aligning fixtures • Pre-installed Air-Loc
gasket for G options.
Housing IC housing, .032” aluminum sealed for Air-Loc Compliance
• Housing is vertically adjustable to accommodate up to a 1” ceiling thickness.
5 5/8” CEILING CUTOUT
DIMENSIONS
Catalog Number Description
ALG5
Air-Loc Gasket
G2405
T-Bar Clips (Set of 4), for S option only
To order, specify catalog number.
Accessories
Catalog Number Input Voltage Lamp Rating
IC20
5" Incandescent New Construction IC Housing 120V A19/BR30/PAR20/PAR30/PAR30L/R20/R30 (See page 2 for max. trim rating)
IC20 G
5" Incandescent New Construction IC Housing with pre-installed Air-Loc gasket 120V A19/BR30/PAR20/PAR30/PAR30L/R20/R30 (See page 2 for max. trim rating)
IC20 S
5" Incandescent New Construction IC Housing with smaller footprint bar hanger (Real Nail 2) 120V A19/BR30/PAR20/PAR30/PAR30L/R20/R30 (See page 2 for max. trim rating)
IC20 S G
5" Incandescent New Construction IC Housing with smaller footprint bar hanger (Real Nail 2) and pre-installed Air-Loc gasket 120V A19/BR30/PAR20/PAR30/PAR30L/R20/R30 (See page 2 for max. trim rating)
IC20 W
5" Incandescent New Construction IC Housing with push-in electrical connectors for fast, secure installation 120V A19/BR30/PAR20/PAR30/PAR30L/R20/R30 (See page 2 for max. trim rating)
IC20 W G
5" Incandescent New Construction IC Housing with push-in electrical connectors and pre-installed Air-Loc gasket 120V A19/BR30/PAR20/PAR30/PAR30L/R20/R30 (See page 2 for max. trim rating)
PRODUCT CODES
Housing and trim can be ordered together or separate, but will always ship separately.