Specification Sheet

1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone] • Visit us at www.acuitybrands.com/juno-recessed
Printed in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 03/01/17
1 of 3
Project:
Fixture Type:
Location:
Contact/Phone:
G1.7.15
4” IC 600 LUMEN
LED DOWNLIGHT
REMODEL
IC1RLED (G4 06LM) RECESSED HOUSING
OPEN TRIMS
DIMENSIONS
4 3/8” CEILING CUTOUT
* Nominal input wattage @ 120-volt operation with dedicated 120-volt
driver under stable operating conditions.
14 1/8"
12 1/2"
7 3/8"
4 3/8"
4 3/4"
ELECTRICAL DATA
Universal Voltage
120V 277V
Input Power 8.7W (+/-5%) 8.9W (+/-5%)
Input Current 0.07A 0.04A
Frequency 50/60Hz 50/60Hz
EMI/RFI FCC Title 47 CFR, Part 15, FCC Title 47 CFR, Part 15,
Class A (commercial) Class A (commercial)
Minimum starting temp -40°C -40°C
ELECTRICAL DATA
Dedicated 120V Only Driver Option
120V
Input Power 8.6W (+/-5%)
Input Current 0.07A
Frequency 50/60Hz
EMI/RFI FCC Title 47 CFR, Part 15,
Class B (residential)
Minimum starting temp -25°C
PRODUCT DESCRIPTION
Dedicated LED, Air-Loc
®
remodel housing with integral light engine
• Shallow housing allows for fit in 2 x 6 construction • IC remodel housing
for remodel application where back side of ceiling is not accessible
• Installs through an opening in the ceiling from below • Secured in place
by factory installed remodel springs • Can be completely covered with
insulation • LED housing is designed to provide 50,000 hours of life and
is compatible with many standard Juno trims • 5 year limited warranty on
LED components.
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT
• No harmful ultraviolet or infrared wavelengths
• No lead or mercury, RoHS compliant
• Comparable light output to 65W incandescent
PRODUCT SPECIFICATIONS
LED Light Engine LED array attached to high purity aluminum, thermally
conductive housing provides superior heat transfer to ensure long life of
the LED • Replaceable light engine mounts directly to housing assembly
and incorporates the latest generation, high lumen output LED array • LEDs
are binned within a 3-step MacAdam Ellipse exceeding ENERGY STAR
®
requirements for superior fixture to fixture color uniformity • 2700K, 3000K,
3500K, or 4000K color temperatures available • 90 CRI minimum.
Optical System Computer-optimized reflector design with high reflectance
finish coupled with a high transmission diffusing lens conceals the LEDs and
produces uniform aperture luminance • Deep regression of lens produces
a low glare, efficient system that can produce over 600 lumens with select
trims (see page 2 for details) using less than 9W*.
Aesthetic Trim Selections Compatible with wide selection of existing Juno
trims • Shadow free, knife edge design blends seamlessly into ceiling.
LED Driver Choice of dedicated 120 volt (120) driver or universal voltage
(MVOLT) driver that accommodates input voltages from 120-277 volts AC
at 50/60Hz • Power factor > 0.9 at 120V input • 120 volt only driver
is dimmable with the use of most incandescent, magnetic low voltage
and electronic low voltage wall box dimmers • Universal voltage driver
is dimmable with the use of most 0-10V wall box dimmers • For a list of
compatible dimmers, see JUNOICLED-DIM • Mounted on the j-box for easy
access and cool operation.
Life Rated for 50,000 hours at 70% lumen maintenance.
Labels ENERGY STAR
®
Certified when used with select trims • Certified to
the high efficacy requirements of California T24 JA8-2016 with select trims
• UL listed for U.S. and Canada damp locations • Union made • UL and
cUL.
Testing All reports are based on published industry procedures; field
performance may differ from laboratory performance.
Product specifications subject to change without notice.
HOUSING FEATURES
Housing Designed for use in IC (insulated ceiling) or non-IC construction
•Aluminum housing sealed for Air-Loc
®
compliance • Remodel springs
accommodate up to 1
1
⁄2” ceiling thickness.
Junction Box Pre-wired junction box provided with (5)
1
⁄2” knockouts,
(4) knockouts for 12/2 or 14/2 NM cable and ground wire
• Knockouts equipped with pryout slots • Quick connect electrical
connectors supplied as standard for fast, secure installation.