Specification Sheet

1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone] • Visit us at www.acuitybrands.com/juno-recessed
Printed in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 03/01/17
1 of 3
Project:
Fixture Type:
Location:
Contact/Phone:
G1.7.34
4” IC 600 LUMEN
LED DOWNLIGHT
NEW CONSTRUCTION
IC1LED (G4 06LM) RECESSED HOUSING
WALL WASH TRIMS
DIMENSIONS
4 1/2” CEILING CUTOUT
12 1/4"
9 1/8"
6 3/4"
6"
PRODUCT DESCRIPTION
Dedicated LED, Air-Loc
®
sealed new construction housing with integral
light engine • Double wall, shallow housing construction allows for fit in
2 x 6 construction • Can be completely covered with insulation • Fully
sealed housing stops infiltration and exfiltration of air, reducing heating
and air cooling costs without the use of additional gaskets • LED housing
is designed to provide 50,000 hours of life and is compatible with many
standard Juno trims • 5 year limited warranty on LED components.
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT
• No harmful ultraviolet or infrared wavelengths
• No lead or mercury, RoHS compliant
• Comparable light output to 65W incandescent
PRODUCT SPECIFICATIONS
LED Light Engine LED array attached to high purity aluminum, thermally
conductive inner housing provides superior heat transfer to ensure long life of
the LED • Replaceable light engine mounts directly to inner housing assembly
and incorporates the latest generation, high lumen output LED array • LEDs
are binned within a 3-step MacAdam Ellipse exceeding ENERGY STAR
®
requirements for superior fixture to fixture color uniformity • 2700K, 3000K,
3500K, or 4000K color temperatures available • 90 CRI minimum.
Optical System Angle-cut aluminum reflector and specular clear kicker
reflector directs light toward wall for uniform illumination on vertical surfaces
while concealing LED optic assembly and minimizing glare • LEDs are
concealed by high transmission diffusing lens.
Aesthetic Trim Selections Recessed lensed wall wash trim • Shadow free,
knife edge design blends seamlessly into ceiling • Reflector finishes include
clear, haze, wheat haze and white painted.
LED Driver Choice of dedicated 120 volt (120) driver or universal voltage
(MVOLT) driver that accommodates input voltages from 120-277 volts AC
at 50/60Hz • Power factor > 0.9 at 120V input • 120 volt only driver is
dimmable with the use of most incandescent, magnetic low voltage and
electronic low voltage wall box dimmers • Universal voltage driver is dimmable
with the use of most 0-10V wall box dimmers • For a list of compatible
dimmers, see JUNOICLED-DIM • Mounted inside housing for easy access from
below ceiling.
Life Rated for 50,000 hours at 70% lumen maintenance.
Labels ENERGY STAR
®
Certified when used with select trims • Certified to
the high efficacy requirements of California T24 with select trims • UL listed
for U.S. and Canada through-branch wiring, damp locations • Union made
• UL and cUL.
Testing All reports are based on published industry procedures; field
performance may differ from laboratory performance.
Product specifications subject to change without notice.
HOUSING FEATURES
Housing Designed for use in IC (insulated ceiling) or non-IC construction
• Aluminum housing sealed for Air-Loc
®
compliance • Housing is vertically
adjustable to accommodate up to a 1
1
⁄2” ceiling thickness.
Junction Box Pre-wired junction box provided with (6)
1
⁄2” and (1)
3
⁄4”
knockouts, (4) knockouts for 12/2 or 14/2 NM cable and ground wire
• UL listed and cUL listed for through-branch wiring, maximum 6 #12
branch circuit conductors • Junction box provided with removable access
plates • Knockouts equipped with pryout slots • Quick connect electrical
connectors supplied as standard for fast, secure installation.
Mounting Frame 22-gauge die-formed galvanized steel mounting frame
• Rough-in section (junction box, mounting frame, housing and bar hangers)
fully assembled for ease of installation.
Real Nail 3 Bar Hangers Patented (US Patent D552,969) Real Nail
®
3 bar
hangers: telescoping system permits quick placement of housing anywhere
within 24” O.C. joists or suspended ceilings • Includes removable nail for
repositioning of fixture in wood joist construction • Integral T-bar notch and
clip for suspended ceilings.
* Nominal input wattage @ 120-volt operation with dedicated 120-volt
driver under stable operating conditions.
ELECTRICAL DATA
Universal Voltage
120V 277V
Input Power 8.7W (+/-5%) 8.9W (+/-5%)
Input Current 0.07A 0.04A
Frequency 50/60Hz 50/60Hz
EMI/RFI FCC Title 47 CFR, Part 15, FCC Title 47 CFR, Part 15,
Class A (non-consumer) Class A (non-consumer)
Minimum starting temp -40°C -40°C
ELECTRICAL DATA
Dedicated 120V Only Driver Option
120V
Input Power 8.6W (+/-5%)
Input Current 0.07A
Frequency 50/60Hz
EMI/RFI FCC Title 47 CFR, Part 15,
Class B (residential)
Minimum starting temp -25°C