Cut Sheet

1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone] • Visit us at www.acuitybrands.com/juno-recessed
Printed in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 03/01/17
1 of 1
Project:
Fixture Type:
Location:
Contact/Phone:
RECTANGULAR
DIE CAST STEP-LIGHT
7W or 9W COMPACT FLUORESCENT LAMP
PL115
G5.6.0
DIMENSIONS
8 1/2” X 3” WALL CUTOUT
PRODUCT DESCRIPTION
PL Housing designed for use in non-insulated areas • If installed where
insulation is present, the insulation must be pulled back 3” from all sides of
the PL housing.
PRODUCT SPECIFICATIONS
Lamp One 7W/9W twin tube CFL lamp.
Socket Horizontal mounted in housing.
Ballast 120V normal power factor magnetic • UL Listed/CSA certified.
Trims Available in white or black baked enamel on cast aluminum
• Fastens to housing with two allen head screws • Opal diffuser supplied
with all trims.
Labels UL listed for wet locations, concrete pour approved and IP • Union
made • UL Listed/CSA certified.
Testing All reports are based on published industry procedures; field
performance may differ from laboratory performance.
Specifications subject to change without notice.
INSTALLATION
Mounting Two brackets supplied for nailing unit to studs.
Junction Box (2)
1
⁄2” conduit compression connections and ground.
Housing Die cast aluminum painted white • Gasketed for wet location
• 8
1
⁄2” L x 3” H x 4
1
⁄8” D.
ORDERING INFORMATION: Housing and trim can be ordered together or separate, but will always ship separately.
Example (Housing): PL115 120 Example (Trim): 835 WH Example (Together): PL115 120 835 WH
Series Voltage Trims Trim Finish
PL115
120 120V 835 Full Opal Lens Step Light Trim
836 Opal Lens with Grill Step Light Trim
837 Opal Lens with Angeled Louvers Step Light Trim
BL Black
WH White
Trim Size: 9
3
⁄4” L x 3
5
⁄8” H
Lamp Rating: 7W or 9W Twin Tube CFL.