Specification Sheet

1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone] • Visit us at www.acuitybrands.com/juno-recessed
Printed in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 06/22/17
1 of 2
Project:
Fixture Type:
Location:
Contact/Phone:
4” BASICS SERIES
™
LED RETROFIT BAFFLE TRIM
DOWNLIGHT RETROFIT FOR STANDARD 4”
RECESSED HOUSINGS
4RLD G3 06LM
G1.8.62
PRODUCT DESCRIPTION
Energy efficient LED retrofit module fits into standard 4” IC or non-IC
recessed housings • Replaces 50W incandescent lamp, producing over
650 lumens • Dimmable with most standard incandescent, magnetic
low voltage and electronic low voltage dimmers • LED retrofit module is
designed to provide 36,000 hours of life • 5 year warranty
PRODUCT SPECIFICATIONS
LED Retrofit Downlight Trim Cast aluminum trim with white baffle and
flange. All-in-one design where LED light engine mounts directly to trim for
ease of installation into existing 4” recessed housings with medium base
sockets • Provided with push-in friction springs.
LED Light Engine LEDs mounted directly to aluminum housing designed to
provide superior thermal management and ensure long life • 2700K, 3000K,
and 3500K LED color temperature • 90 CRI minimum • Accommodates 120
volts AC at 60Hz • Dimmable with most standard incandescent, magnetic
low voltage and electronic low voltage dimmers • For a list of compatible
dimmers, see JUNORETROBASICS-DIM.
Electrical Connections Trim features quick connect plug installed as
standard for installation into IC1 LEDT24 and IC1R LEDT24 housings with
mating connector • Trim ships with a medium base socket adapter whip for
installation into 4” incandescent housings with medium base sockets.
Trim Cast aluminum baffle trim with white finish • Diffusing lens conceals
the LEDs from direct view and provides uniform aperture luminance.
Life Rated for 36,000 hours at 70% lumen maintenance.
Labels ENERGY STAR
®
Certified • Certified to the high efficacy
requirements of California T24 • UL and cUL classified for use with most
standard UL listed 4” recessed incandescent housings and Juno IC1 LEDT24
and IC1R LEDT24; see below for specific compatibility requirements
• Damp location • Suitable for wet locations (indoor covered ceilings).
Testing All reports are based on published industry procedures; field
performance may differ from laboratory performance.
Specifications subject to change without notice.
INSTALLATION
The LED retrofit baffle trim is provided with push-in friction springs as
standard.
COMPATIBLE HOUSINGS
The 4RLD retrofit baffle trim is compatible with most 4” recessed housings
measuring at least 4” high with an inside diameter between 4” and 4-1/2”.
Compatible housings include, but not limited to:
Juno housings: IC1 and TC1 Series
Juno quick-connect LED housings: IC1 LEDT24 and IC1R LEDT24
VuLite
®
housings: V4IC and V4TC Series
Lithonia
®
housings: L3 Series
Halo
®
housings: H99 Series
Thomas
®
housings: PS4 Series
Capri
®
housings: P4 and R4 Series
DIMENSIONS
1/4”
2”
5”
PERFORMANCE DATA
27K 30K 35K
Input Voltage 120V 120V 120V
Input Power Typical 10W 10W 10W
Frequency 60Hz 60Hz 60Hz
EMI/RFI
FCC Title 47,
Part 15
Class B (consumer)
FCC Title 47,
Part 15
Class B (consumer)
FCC Title 47,
Part 15
Class B (consumer)
Minimum starting temp -30°C (-22°F) -30°C (-22°F) -30°C (-22°F)
CRI 90 min. 90 min. 90 min.
CCT 2700K 3000K 3500K
ORDERING INFORMATION
Ordering Example: 4RLD G3 06LM 27K 90CRI 120 FRPC WWH
Trim Series Generation Lumens
Color
Temperature
Color
Rendering Index Voltage Driver Finish
4RLD 4" Juno Basics
Retrofit Downlight
G3 Generation 3 06LM 600 Nominal
Lumens
27K 2700K
30K 3000K
35K 3500K
90CRI 90+ CRI 120 120V FRPC Forward/
Reverse
Phase Cut
WWH White,
White
Trim
Ring