User manual

14
AUTOMATIC OPERATION
The AUTOMATIC function automatically works out the
correct cooking mode and cooking time. You can
choose from 7 AUTO COOK menus and 5 AUTO
DEFROST menus. What you need to know when
using this automatic function:
1. Press the AUTO PROGRAMMES button once, the
display will appear as shown.
The menu can be chosen by pressing the AUTO
PROGRAMMES button until the desired menu
number is displayed. See pages 15 - 17
“AUTOMATIC charts”.
To select a defrost menu, press the AUTO
PROGRAMMES button at least 8 times. If you
press the button 8 times, will appear in the
display.
The menu will be changed automatically by holding
down the AUTO PROGRAMMES button.
2. The weight or quantity of the food can be input by
rotating the TIMER/WEIGHT knob until the desired
weight is displayed.
• Enter the weight of the food only. Do not include the
weight of the container.
• For food weighing more or less than weights given in
the automatic chart, use manual programmes. For best
results, follow the cooking charts on pages 19 - 21.
3. To start cooking press START/+30 button.
When action is required (e.g. to turn food over), the
oven stops and the audible signals sound,
remaining cooking time and any indicator will flash
on the display. To continue cooking, press the
START/+30 button.
START/+30
button
TIMER/WEIGHT
knob
AUTO PROGRAMMES
button
Menu number
1.
x1
2.
3.
The final temperature will vary according to the
initial food temperature. Check food is piping hot
after cooking. If necessary, you can extend the
cooking time and change the power level.
Example:
To cook gratin weighing 1,0 kg using AUTO COOK AC-7.
2. Enter the weight by rotating
the TIMER/WEIGHT knob
clockwise.
x7
3. Press the START/+30
button.
1. Select the menu required by
pressing the AUTO
PROGRAMMES button
seven times.
x1
Check the display.
FINAL JN-21+22D-EU English 24/05/2004 13:52 Page 14