Installation Instructions

INSTALLATION INSTRUCTIONS
For J6AI Retrofit Trim Series 1000 Lumen (Patent Pending)
1300 South Wolf Road | Des Plaines, IL 60018 | Phone: [phone] | www.acuitybrands.com/J6AI
© 2019 Acuity Brands Lighting, Inc. All rights reserved. | JUN_8678.07_0919 | P6190
WARNING
: For your safety, read and understand instructions completely before starting
installation. Before wiring to power supply, turn off electricity at the fuse or circuit breaker box.
NOTE: Juno recessed products are designed to meet the latest NEC requirements and
are classified in compliance with applicable UL standards. Before attempting installation
of any recessed lighting product, check your local electrical building code. This code
sets the wiring standards and installation requirements for your locality and should be
understood before starting work.
SAVE THESE INSTRUCTIONS
Product Information
Juno’s J6AI (downlight) LED trim may be used as a retrofit trim for 6" incandescent
housings already installed in application or with dedicated quick connect housings by
Juno with part numbers IC23 LEDT24 and IC23R LEDT24.
The J6AI Retrofit trim consists of the following: Retrofit trim with quick connect, medium
base socket adaptor* with mating quick connect and installation instructions. Check for all
contents prior to installation.
Do not make or alter any open holes in an enclosure of wiring or electrical components
during kit installation.
WARNING: Risk of fire or electric shock.
• Do not alter, relocate, or remove wiring, lampholders, power supply, or any other
electrical component.
• Installation of this retrofit assembly requires a person familiar with the construction and
operation of the luminaire’s electrical system and the hazard involved. If not qualified,
do not attempt installation. Contact qualified electrician.
• Install this kit only in luminaires that have the construction features and dimensions
described in these instructions, and where the input rating of the retrofit kit does not
exceed the input rating of the luminaire.
WARNING - To pr
event wiring damage or abrasion, do not expose wiring to edges of
sheet metal or other sharp objects.
*To order medium base socket adapter with mating quick connect accessory specify
catalog number: LEDRETROWHIP
FCC Supplier’s Declaration of Conformity
JUNO AI / J6AIALXA DB, J6AIALXA DC, J6AISPKR DB, J6AISPKR DC, J6AIDWNL DB,
J6AIDWNL DC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Suppliers Name: Acuity Brands Lighting, Inc.
Suppliers Address (USA): 1300 South Wolf Road | Des Plaines, IL 60018
Suppliers phone number: 800.323.5068
CAUTION: The user is cautioned that changes or modifications not expressly approved
by the manufacturer could void the user’s regulatory authority to operate the device.
NOTE: This device has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This device generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the device and receiver.
— Connect the device into an outlet on a circuit different from that to which the
receiver is connected.
— Consult the manufacturer or an experienced radio/TV technician for help.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme
aux CNR d’Innovation, Sciences et Développement économique Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
RF RADIATION EXPOSURE STATEMENT: This device complies with FCC and ISED
RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device
should be installed and operated with a minimum distance of 20cm between the device
and any part of the user’s body.
Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de
séparation d’au moins 20 cm doit être maintenue entre l’antenne de cet appareil ettoutes
les personnes.
Only for 5G Devices
The devices for the band 5150-5350 MHz are only for indoor use.
Les appareils de la bande 5150-5350 mhz ne sont conçus que pour une utilisation en intérieur.
Juno J6AI Retrofit LED Trim Compatibility
Incandescent Housing Compatibility
The Juno J6AI is designed to work with most standard UL listed 6” recessed
incandescent housings. When used with standard medium base incandescent housings,
the medium base socket adaptor must be used. Housing compatibility can be determined
by measuring the recessed housing as follows (Fig. 1):
A) Height: The housing must
be at least 5-1/4" high
B) Diameter: The housing inside
diameter must be between
6" and 6-3/4"
Minimum lamp compartments:
150 in
3
(2458 cm
3
) for
Model J6AI Downlight
Diameter
Figure 1
Hei ght