Datasheet
4
WXC Application Acceleration Platform Functions
Product Features
Trafc services IP payload compression, protocol acceleration, QoS, trafc visibility, application identication, route optimization,
IPSec encryption, packet aggregation
Protocols supported Any IP-based trafc (TCP, UDP, GRE, etc.)
Network Integration
Installation Inline between aggregation switch and edge router, or off WAN router using route injection (RIP), WCCPv2, or
policy-based routing
Auto-deployment No-touch auto-conguration available out of the box through WX CMS software
Transparency Transparent bridge mode operation, congurable DSCP and IP port transparency
Topology support Point-to-point, hub-and-spoke, full mesh
Network discovery Via RIP v1/v2, OSPF, and router polling
Tunnel creation Automatic or manual
Asymmetric routing support Supported for both inline and off-path
Load balancing Active/active or active/passive, with passive in hot standby
Fault-tolerant non-stop operation 10/100/1000BaseT auto switch-to-wire on any power, hardware, or software failure condition
High availability Backup device can support multiple primary devices: automatically fail-to-wire
Quality of Service
Honor, preserve and/or set ToS/DSCP Retain settings or prioritize using ToS/DiffServ values by application
Bandwidth allocation Create trafc classes for bandwidth allocation with time of day option
Application identication Automatic, based on source/destination IP address/port, ToS/DSCP, IP protocol, L7 identication for HTTP and
Citrix; follows port hopping applications (FTP, Exchange)
Route optimization Multipath: application level path selection based on link SLA
Traffic Acceleration
Packet Flow Acceleration TCP Acceleration, Fast Connection Setup, and Forward Error Correction
Application Flow Acceleration Microsoft CIFS, Linux le services, Microsoft Exchange and HTTP
Device Management
SNMP, Syslog SNMPv2c, MIB II, WX Enterprise MIB and local Syslog
Secure remote access SSHv1, SSHv2, and HTTPS (SSL)
Reports 26 device-level reports available through WebView; 36 network-wide reports available with WX CMS
Authentication, Authorization and Accounting AAA local database, RADIUS support
Network upgradeable Via FTP, HTTP and TFTP; dual software images and congurations
Monitoring
Compression statistics Per device, per application, and per destination; both real-time and historical
WAN performance statistics Network latency, loss, and availability for SLA monitoring and enforcement
QoS, bandwidth management Per destination, per trafc class, real-time and historical
Acceleration TCP session time and throughput; both real-time and historical
Data export CSV format and NetFlow version 5 records
Application reporting Detail by IP addresses, and/or port numbers, and/or IP protocol, and/or DSCP/ToS value, with greater detail by
URL element or application type
Event/performance monitoring Generate automatic alerts (SNMP traps, e-mail, console) for up to 200 administrator denable performance or
system events