manual

APPLICATION NOTE - VMware View with Juniper Networks SA Series SSL VPN Appliances

• Select “Show ALL Autopolicy types.”

• Enter the URL for the View Connection Server in the “Base URL” input field.

• The Web Access Control policy should fill automatically after doing this.

• Select the check box “Autopolicy: Single Sign-on.”

• Select the radio button “Remote SSO.”

• Select the check box “POST the following data.”

• Enter the resource, e.g. http://<view connection server>.

• Enter the Post URL which is http://<view connection server>:80/index.jsp (or https).

• If the authentication server to the SSL VPN is Active Directory, then add the following data including the angle

brackets:

Note: If 2-factor authentication is being used, then it will be necessary to configure a secondary authentication

server for Active Directory, using the options <USERNAME[2]> and <PASSWORD[2]> in order to send the proper user

credentials for single sign-on.

Important: When WSAM is used, a caching override policy must be utilized, as the SA Series marks all content as non-

cacheable by default. This causes some conflicts with compressed .cab files. To do this, create a “caching” policy with

the proper VMware URL path with /*.cab at the end, and with the setting “Unchanged.”