Datasheet

•
Model number for Multiservices 400 PIC: PB-MS-400-2
•
Model number for Multiservices 500 PIC: PB-MS-500-3
•
Multiservices 400: up to 3.2 million flows
•
Multiservices 500: up to 3.2 million flows
Hardware features
•
Support for up to 2000 service sets
•
Support for MTUs up to 9192 bytes for Gigabit Ethernet and SONET interfaces
Depending on your Junos OS Release and individual licenses, software features for this PIC can
include the features listed in Table 17 on page 99. For more information about the software features
available for services PICs, see the Junos OS Services Interfaces Library for Routing Devices.
Software features
PIC STATUS LED, one tricolor:
•
Off—PIC is offline and it is safe to remove it from the chassis.
•
Green—PIC is operating normally.
•
Yellow—PIC is initializing.
•
Red—PIC has an error or failure and no further harm can be done by removing it from the chassis.
Application APP STATUS LED, one bicolor:
•
Off—Service is not running.
Green—Service is running under acceptable load.
•
Yellow—Service is overloaded.
LEDs
Table 17: MultiServices PICs Software Features Supported on the T4000 Router
MultiServices 500MultiServices 400Software Feature
––GRE Key
––GRE dont-fragment
––Stateful firewall with packet inspection:
detects SYN attacks, ICMP and UDP floods,
and ping-of-death attacks
––Network Address Translation (NAT) for IP
addresses
––Port Address Translation (PAT) for port
numbers
––IP Security (IPSec) encryption
12.1R2–Flow aggregation
12.1R2–Active flow monitoring exports cflowd version
5 and version 8 records
12.1R2–Active flow monitoring exports flow
monitoring version 9 records, based on RFC
3954
99Copyright © 2013, Juniper Networks, Inc.
MultiServices PICs (T4000 Router)