Datasheet

Type 5 PIC
•
Twenty four 10-Gigabit Ethernet SFP+ ports (only ports 0 through 12 are supported in line-rate
mode)
•
Power requirements: 0.94 A @48 V (45 W)
•
Model number for 24-Port Type 5 PIC with Oversubscription: PF-24XGE-SFPP
Type 4 PIC
•
High-performance throughput:
•
WAN-PHY mode at 9.953 Gbps
•
LAN-PHY mode at 10.3 Gbps
•
Full-duplex mode
•
Large maximum transmission units (MTUs) of up to 9192 bytes
Type 5 PIC
•
Oversubscribed mode
•
Online/Offline button
Hardware features
•
Two modes of operation: 5 ports in line-rate mode, 10 ports in oversubscribed mode
•
Intelligent handling of oversubscribed traffic
•
Flexible mapping of port-assigned queues and scheduler resources at both ingress and egress
•
Strict-priority queue available on a per-port basis
•
QoS available on a per-port basis
•
Weighted round-robin (WRR)
•
L2 Protocol support:
•
Ethernet CCC, Ethernet TCC, Ethernet VPLS
•
VLAN CCC
•
Extended VLAN TCC
•
VLAN VPLS
•
Flexible-Ethernet-services
•
L3 Protocol support
•
IPv4
•
IPv6
•
MPLS
•
VLAN support
•
4000 VLANs per PIC
•
Flex-VLAN tagging support
•
Interrupt driven link-down detection
•
Pause frame support
•
Jumbo frame support
•
MAC learning, aging, and filtering
•
MAC policing
•
Virtual Router Redundancy Protocol (VRRP) support
•
IEEE 802.3ad Link Aggregation
NOTE: For PICS that support oversubscription, the PIC must be in line-rate mode to support
aggregated Ethernet.
•
DSCP rewrite
Software features for
Type 4 PIC
Copyright © 2013, Juniper Networks, Inc.82
T4000 Core Router Interface Module Reference