Datasheet

•
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
•
Configurable WAN-PHY mode options:
•
loopback
•
mpls
•
path-trace
•
trigger
•
Virtual Router Redundancy Protocol (VRRP) support
•
Hierarchical shaping
•
Fine-grained queuing and shaping per logical interface at both ingress and egress
•
802.1q virtual LANs (VLANs)
•
VLAN stacking and rewriting
•
Channels defined by two stacked VLAN tags
•
Multiple tag protocol identifiers (TPID) support
•
IP service for nonstandard TPID and stacked VLAN tags
•
802.1p rewrite per channel
•
Flexible mapping of channels and scheduler resources at both ingress and egress
•
Flexible Ethernet encapsulation
•
MAC learning, policing, accounting, and filtering
Software features
•
You can install any transceiver supported by the PIC.
•
Fiber-optic 10-Gigabit small form-factor pluggable (XFP) transceivers:
•
Duplex LC connector (Rx and Tx)
•
10-Gigabit Ethernet XFP transceivers:
•
10GBASE-S (model number: XFP-10G-S)
•
10GBASE-L (model number: XFP-10G-L-OC192-SR1)
•
10GBASE-E (model number: XFP-10G-E-OC192-IR2)
•
10GBASE-Z (model number: XFP-10G-Z-OC192-LR2)
Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface
Specifications
Cables and connectors
OK LED, one tricolor:
•
Off—PIC is offline and safe to remove from the router.
•
Green—PIC is operating normally.
•
Yellow—PIC is initializing.
•
Red—PIC has an error or failure.
APP LED, one:
•
Off—Monitoring application is not running.
•
Green—Monitoring application is running under acceptable load.
•
Yellow—Monitoring application is overloaded.
LINK STATUS LED, one:
•
Off—Port is down.
•
Green—Port is online. Link is established.
LEDs
71Copyright © 2013, Juniper Networks, Inc.
10-Gigabit Ethernet IQ2 PIC with XFP (T4000 Router)