Datasheet

Tunnel Services PICs (T4000 Router)
•
Junos OS Release 12.1R2 and later (Type 1)
•
Junos OS Release 12.2R2 and later (Type 2)
•
Junos OS Release 12.1R2 and later (Type 3)
For information on which FPCs support this PIC, see “T4000 PIC/FPC Compatibility” on page 10.
Software release
•
Power requirement: 0.07 A @ 48 V (3.4 W)
•
Model number for Type 1 Tunnel Services PIC: PB-TUNNEL1
•
Model number for Type 2 Tunnel Services PIC: PB-TUNNEL
•
Model number for Type 3 Tunnel Services PIC: PC-TUNNEL
Description
•
Loopback function that encapsulates and de-encapsulates packets
•
OC12/STM4 tunneling bandwidth on Type 1 FPC
•
OC48/STM16 tunneling bandwidth on Type 2 FPC
•
OC192/STM64 tunneling bandwidth on Type 3 FPC
Hardware features
For a list of the software features available for services PICs, see the Junos Services Interfaces
Configuration Release.
•
IP-IP unicast tunneling
•
GRE unicast tunneling
•
PIM sparse mode unicast tunneling
Software features
One STATUS LED, tricolor:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
LEDs
Related
Documentation
T4000 PIC Description on page 3•
• T4000 PICs Supported on page 4
133Copyright © 2013, Juniper Networks, Inc.
Tunnel Services PICs (T4000 Router)