Datasheet

SONET/SDH OC192/STM64 EOL PIC (T4000 Router)
•
Junos OS Release 12.1R2 and later (Type 3)Software release
•
One OC192 port
•
Power requirement: 0.45 A @ 48 V (21.6 W)
•
Model number: PC-1OC192-SON-SR2
Description
•
Multiplexing and demultiplexing
•
Rate policing on input
•
Rate shaping on output
•
Packet buffering, Layer 2 parsing
Hardware features
•
SONET/SDH framing
•
IEEE 802.3ad Link Aggregation
•
Alarm and event counting and detection
•
Dual-router automatic protection switching (APS)
•
Multiprotocol Label Switching (MPLS) fast reroute
•
Layer 2 protocols:
•
High-Level Data Link Control (HDLC)
•
Frame Relay
•
Circuit cross-connect (CCC)
•
Translational cross-connect (TCC)
•
Point-to-Point Protocol (PPP)
Software features
SONET/SDH OC192/STM64 fixed transceiver: Short reach (SR-2): duplex SC connector (Rx
and Tx)
•
Optical interface specifications—see SONET/SDH OC192/STM64 Optical Interface
Specifications
NOTE: To extend the life of the laser, when a PIC is not being actively used with any valid links,
take the PIC offline until you are ready to establish a link to another device. For information
about taking a PIC offline, see the request chassis pic offline command in request chassis pic.
Cables and connectors
125Copyright © 2013, Juniper Networks, Inc.
SONET/SDH OC192/STM64 EOL PIC (T4000 Router)