User Manual

•
10-Gigabit SFP+ transceivers:
•
Connector: Duplex LC/PC (Rx and Tx)
•
10GBASE-ER (model number: SFPP-10GE-ER)
•
10GBASE-LR (model number: SFPP-10GE-LR)
•
10GBASE-LRM (model number: SFPP-10GE-LRM)
•
10GBASE-SR (model number: SFPP-10GE-SR)
•
10GBASE-Z (model number: SFPP-10GE-ZR) is supported in Junos OS Release 12.2 and later
Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface
Specifications
Cables and connectors
OK/FAIL LED, one bicolor:
•
Steady green—MPC is functioning normally.
•
Blinking green—MPC is transitioning online or offline.
•
Red—MPC has failed.
Enable/disable LED, one bicolor per port:
•
Green—Port is enabled.
•
Yellow—Port is not functioning normally.
•
Off—Port is disabled.
The enable/disable LEDs are labeled in groups of four:
•
0/0 through 0/3
•
1/0 through 1/3
•
2/0 through 2/3
•
3/0 through 3/3
LEDs
Copyright © 2013, Juniper Networks, Inc.76
MX Series 3D Universal Edge Routers Line Card Guide