User Manual
Protocols and Applications Supported by the Multiservices DPC (MS-DPC)
Table 6 on page 71 contains the first Junos OS Release support for protocols and
applications on the MX240, MX480, and MX960 Multiservices DPCs. A dash indicates
that the protocol or application is not supported.
NOTE: The maximum number of supported MS-DPCs is as follows except
where noted in Table 6 on page 71:
•
MX240 router: 2
•
MX240 router: 4
•
MX960 router: 6
Table 6: Protocols and Applications Supported by the Multiservices DPC
(MS-DPC)
MS-DPCProtocol or Application
9.3Accepts traffic destined for GRE tunnels
9.3Active flow monitoring exports cflowd version 5 and
version 8 records
9.3Active flow monitoring exports flow monitoring version 9
records, based on RFC 3954
9.4Graceful Routing Engine Switchover (GRES)
9.3GRE dont fragment
9.3GRE Key
9.3GRE reassembly
9.3IP Security (IPSec) encryption
9.3Network Address Translation (NAT) for IP addresses
NOTE: The MX960 supports 8 MS-DPCs using this
feature.
10.2Packet-triggered dynamic subscribers and policy control
(PTSP)
9.3Port Address Translation (PAT) for port numbers
9.3Real-time Performance Monitoring (RPM)
71Copyright © 2013, Juniper Networks, Inc.
Protocols and Applications Supported by the Multiservices DPC (MS-DPC)