User Manual

Protocols and Applications Supported by Enhanced Queuing IP Services DPCs
(DPCE-R-Q)
Table 4 on page 61 contains the first Junos OS Release support for protocols and
applications on the MX240, MX480, and MX960 Enhanced Queuing IP Services DPCs.
A dash indicates that the protocol or application is not supported.
Table 4: Protocols and Applications Supported by the Enhanced Queuing IP Services DPCs
(DPCE-R-Q)
First Junos OS Release Supported by DPC Model Number (DPC
Name)
Protocol or Application
DPCE-R-Q-20GE-2XGE
Enhanced Queuing
IP Services
Multi-Rate DPC
DPCE-R-Q-20GE-SFP
Enhanced Queuing
IP Services DPC
DPCE-R-Q-4XGE-XFP
DPCE-R-Q-40GE-SFP
Enhanced Queuing
IP Services DPC
9.49.49.4Access Node Control Protocol (ANCP)
9.39.18.5Accepts traffic destined for GRE tunnels or
DVMRP (IP-in-IP) tunnels
9.39.18.5Bidirectional Forwarding Detection protocol
(BFD)
9.39.18.5Border Gateway Protocol (BGP)
9.39.18.5BGP/Multiprotocol Label Switching (MPLS)
virtual private networks (VPNs)
9.39.18.5Distance Vector Multicast Routing Protocol
(DVMRP) and generic routing encapsulation
(GRE) support—access side and server side
9.39.18.5IEEE 802.1ag Ethernet OAM Continuity Check
protocol
9.39.19.0IEEE 802.1ag Ethernet OAM Linktrace protocol
9.39.19.1IEEE 802.1ag Ethernet OAM Loopback protocol
9.39.18.5Firewall filters
9.39.18.5Flexible Ethernet encapsulation
9.39.18.5Graceful Routing Engine Switchover (GRES)
9.39.39.3In-service software upgrade (ISSU) (excludes
IEEE 802.1ag OAM, IEEE 802.3ah, and LACP
protocols)
61Copyright © 2013, Juniper Networks, Inc.
Protocols and Applications Supported by Enhanced Queuing IP Services DPCs (DPCE-R-Q)