User Manual

10-Gigabit Ethernet DPC with XFP
•
Junos OS Release 8.2 and later
•
End-of-life (see notification PSN-2009-06-400)
Software release
•
Four 10-Gigabit Ethernet ports
•
Power requirement: 6.46 A @ 48 V (310 W)
•
Weight: 13.1 lb (5.9 kg)
•
Model number: DPC-R-4XGE-XFP
Description
•
High-performance throughput on each port at speeds up to 10 Gbps
•
WAN-PHY mode at 9.953 Gbps
•
LAN-PHY mode at 10.3125 Gbps
•
Full-duplex mode
•
Maximum transmission units (MTUs) of up to 9192 bytes
Hardware features
•
Configurable WAN-PHY mode options
•
See “Protocols and Applications Supported by DPCs and Enhanced DPCs (DPC and DPCE-R)”
on page 49 for information about the protocols and applications that this DPC supports.
Software features
•
You can install any transceiver supported by the DPC. For information about installing and
removing transceivers, see the hardware guide for your router.
•
Fiber-optic 10-gigabit small form-factor pluggable (XFP) transceivers:
•
Connector: Duplex LC/PC (Rx and Tx)
•
10GBASE-E (model number: XFP-10G-E-OC192-IR2)
•
10GBASE-L (model number: XFP-10G-L-OC192-SR1)
•
10GBASE-S (model number: XFP-10G-S)
•
10GBASE-Z (model number: XFP-10G-Z-OC192-LR2)
Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface
Specifications
Cables and connectors
Copyright © 2013, Juniper Networks, Inc.24
MX Series 3D Universal Edge Routers Line Card Guide