User Manual

•
Fiber-optic 10-gigabit small form-factor pluggable (XFP) transceivers:
•
Connector: Duplex LC/PC (Rx and Tx)
•
Short reach (SR-1) (model number: XFP-10G-L-OC192-SR1)
•
Intermediate reach (IR-2) (model number: XFP-10G-E-OC192-IR2)
•
Long reach (LR-2) (model number: XFP-10G-Z-OC192-LR2)
Optical interface specifications—see SONET/SDH OC192/STM64 Optical Interface
Specifications
NOTE: To extend the life of the laser, when a PIC is not being actively used with any valid links,
take the PIC offline until you are ready to establish a link to another device. For information about
taking a PIC offline, see the request chassis pic offline command in the Junos OS Operational Mode
Commands.
Cables and connectors
One tricolor LED per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
LEDs
193Copyright © 2013, Juniper Networks, Inc.
SONET/SDH OC192c/STM64 PIC with XFP