User Manual

SONET alarms:
•
Loss of light (LOL)
•
Loss of signal (LOS)
•
Loss of frame (LOF)
•
Phase lock loop (PLL)
•
Severely errored frame (SEF)
•
Alarm indicator signal–line (AIS-L)
•
Alarm indicator signal–path (AIS-P)
•
Remote defect indicator–line (RDI-L)
•
Remote defect indicator–path (RDI-P)
•
Loss of pointer–path (LOP-P)
•
Bit error rate–signal degrade (BERR-SD)
•
Bit error rate–signal fail (BERR-SF)
•
Payload label mismatch–Path (PLM-P)
•
Unequipped–path (UNEQ-P)
•
Remote error indicator–path (REI-P)
•
Alarm indicator signal–virtual container (V-AIS)
•
Loss of pointer–virtual container (V-LOP)
•
Remote defect indicator–virtual container (V-RDI)
•
Unequipped–virtual container (V-UNEQ)
•
Mismatch–virtual container (V-MIS)
SDH alarms:
•
Loss of light (LOL)
•
Phase lock loop (PLL)
•
Loss of frame (LOF)
•
Loss of signal (LOS)
•
Severely errored frame (SEF)
•
Multiplex-section alarm indicator signal (MS-AIS)
•
H Path alarm indicator signal (HP-AIS)
•
Loss of pointer (LOP)
•
Bit error rate–signal degrade (BER-SD)
•
Bit error rate–signal fail (BER-SF)
•
Multiplex section–far end receive failure (MS-FERF)
•
High order path–far end receive failure (HP-FERF)
•
High order path–payload label mismatch (HP-PLM)
•
Remote error indicator (REI)
•
Unequipped (UNEQ)
•
Tributary unit–alarm indicator signal (TU-AIS)
•
Tributary unit–loss of pointer (TU-LOP)
•
Tributary unit–remote defect indicator (TU-RDI)
•
Tributary unit–unequipped (TU-UNEQ)
•
Tributary unit–mismatch (TU-MIS)
Alarms, errors, and
events
Copyright © 2013, Juniper Networks, Inc.140
MX Series 3D Universal Edge Routers Line Card Guide