User Manual

•
Fiber-optic 10-gigabit small form-factor pluggable (SFP+) transceivers:
•
Connector: Duplex LC
•
10GBASE-SR (model number: SFPP-10GE-SR)
•
10GBASE-LR (model number: SFPP-10GE-LR)
•
10GBASE-ER (model number: SFPP-10GE-ER-XT)
•
10GBASE-ZR (model number: SFPP-10GE-ZR)
NOTE: SFPP-10GE-ZR does not have an extended case temperature and is not NEBS compliant
when plugged into the 10-Gigabit Ethernet MIC with SFP+. If the ambient air temperature exceeds
40 degrees C, the software disables the transmitter, which takes the MIC offline.
Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface
Specifications
Cables and connectors
OK/FAIL LED, one bicolor:
•
Green—MIC is functioning normally.
•
Yellow—MIC has failed.
LINK LED, one per SFP+ port:
•
Off—No link.
•
Green—Link is up.
•
Yellow—Link is disabled.
The ports are labeled:
•
Port [0] to Port [9]
LEDs
Copyright © 2013, Juniper Networks, Inc.130
MX Series 3D Universal Edge Routers Line Card Guide