User Manual

•
Maximum transmission units (MTUs) of up to 9192 bytes
•
Framing: M13, C-bit parity, framed clear channel
•
Subrate and scrambling:
NOTE: Only DS3 interfaces support subrate and scrambling.
•
Digital Link/Quick Eagle
•
Kentrox
•
Larscom
•
ADTRAN
•
Verilink
•
Internal and look clocking
•
DS3 far-end alarm and control (FEAC) channel
•
Full bit error rate test (BERT) for DS0, DS1, and DS3
•
Encapsulations:
•
MPLS fast reroute
•
MPLS CCC (circuit cross-connection)
•
MPLS TCC (translational cross-connection)
•
Cisco High-Level Data Link Control (cHDLC)
•
Cisco HDLC CCC
•
Cisco HDLC TCC
•
Point-to-Point Protocol (PPP)
•
PPP for CCC
•
PPP for TCC
•
Flexible Frame Relay
•
Frame Relay
•
Frame Relay for CCC
•
Frame Relay for TCC
•
PPP over Frame Relay
NOTE: Ethernet over Frame Relay is not supported.
•
Encapsulations available only for Channelized DS3/E3 MIC (Junos OS Release 12.1 and later):
•
Multilink Point-to-Point Protocol (MLPPP)
•
Multiclass MLPPP
•
Multilink Frame Relay (MLFR) end-to-end (FRF.15)
•
Multilink Frame Relay (MLFR) UNI NNI (FRF.16, also referred to as MFR)
•
Compressed Real-Time Transport Protocol (CRTP)
NOTE: When you configure multilink services on a MIC in an MX Series router, ensure that a
Multiservices DPC is present in the same router.
Software features
•
Coaxial:
Custom 10-ft (3-m) mini-SMB to BNC cable (provided, model number: CBL-DS3-E3-M-S), set
of 8 cables (bundled RX and TX)
Cables and connectors
123Copyright © 2013, Juniper Networks, Inc.
DS3/E3 MIC