User Manual

Table 10: Protocols and Applications Supported by the MX Series MPC3E (continued)
First Supported Junos OS ReleaseProtocol or Application
12.1MPLS node protection, link protection, and statistics for static LSPs
-Multiple VLAN Registration Protocol (MVRP)
12.1Multitopology routing
12.1Nonstop active routing (NSR)
12.1OSPF
12.2Packet mirroring
-Precision Time Protocol (IEEE 1588)
-IEEE 802.1ah provider backbone bridges (PBB)
-Push a tag on Ethernet VPLS and Ethernet CCC tag encapsulations
12.1RSVP
12.1RIP
12.1SNMP
12.2Spanning Tree Protocols:
•
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) (part of IEEE 802.1Q
VLANs)
•
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
•
IEEE 802.1D Spanning Tree Protocol (STP)
•
Per-VLAN Spanning Tree (PVST)
•
Bridge protocol data units (BPDUs) guard and loop guard
•
STP inter-protocol action profiles and MAC flush (in VPLS multi-homing,
flush all MACs when there is a change in the STP interface state due to root
protect)
-Subscriber management:
•
Aggregated Ethernet over static VLANs
•
Aggregated Ethernet over dynamic VLANs
•
DHCP access model
•
Dynamic adjustment of shapers
•
Dynamic PPPoE subscriber interface creation based on PPPoE service name
table configuration
•
Dynamic profiles
•
Dynamic shaping, scheduling, and queuing
•
Dynamic VLANs
•
Static and dynamic PPPoE subscriber interfaces
111Copyright © 2013, Juniper Networks, Inc.
Protocols and Applications Supported by the MX240, MX480, MX960 MPC3E