User Manual

Table 10: Protocols and Applications Supported by the MX Series MPC3E (continued)
First Supported Junos OS ReleaseProtocol or Application
Release
•
12.1
•
12.1
•
12.1
•
12.1
•
12.1
•
12.1
•
12.1
•
12.1
•
12.1
•
12.1
•
12.2
Layer 3 features:
•
IPv6
•
Directed broadcast
•
Interoperability of PIM register message with Cisco IOS
•
BFD session failure action for LDP LSPs (including ECMP)
•
ASM group override of SSM ranges
•
Data multicast distribution trees (MDTs)
•
Subsequent address family identifier information (SAFI)
•
Multicast in BGP and MPLS VPNs (Draft Rosen 7, Interprovider option A)
•
Support local-as alias command
•
l3vpn-composite-nexthop with eiBGP interoperability
•
Multicast over IRB
12.1Link aggregation (IEEE 802.3ad)
12.1Link Aggregation Control Protocol (LACP)
-Link Layer Discovery Protocol(LLDP)
12.1Local loopback
12.1MAC learning, policing, accounting, and filtering
-Mobile IP
-Multichassis link aggregation
12.1Multiple Tag Protocol Identifiers (TPIDs)
12.1MPLS:
•
Switching of pseudowire segments (multisegment pseudowires with
BGP-L2VPN)
•
LDP signaling for VPLS (LDP-VPLS) and MAC flush message processing
(MAC-FLUSH-TLV)
•
RSVP graceful restart interoperability with Cisco using Nodal Hello
•
Failure action on BFD session down of RSVP LSPs
•
OSPF and IS-IS loop-free alternates (LFA)
•
4/5 label MPLS operation
•
Virtual circuit connection verification (VCCV) BFD
•
Pointto multipoint using the enhanced-ip command (support for NG-MVPN
and P2MP load balancing over aggregated Ethernet)
•
MPLS-FRR bypass link protection
•
Load sharing across 64 ECMP next hops
•
MPLS-FRR VPLS instance prioritization
•
Five label stack on ingress
Copyright © 2013, Juniper Networks, Inc.110
MX Series 3D Universal Edge Routers Line Card Guide