Datasheet

Protocols and Applications Supported by the Multiservices DPC (MS-DPC)

Table 6 on page 71 contains the first Junos OS Release support for protocols and

applications on the MX240, MX480, and MX960 Multiservices DPCs. A dash indicates

that the protocol or application is not supported.

Table 6: Protocols and Applications Supported by the Multiservices DPC

(MS-DPC)

MS-DPCProtocol or Application

9.3Accepts traffic destined for GRE tunnels

9.3Active flow monitoring exports cflowd version 5 and

version 8 records

9.3Active flow monitoring exports flow monitoring version 9

records, based on RFC 3954

9.4Graceful Routing Engine Switchover (GRES)

9.3GRE dont fragment

9.3GRE Key

9.3GRE reassembly

9.3IP Security (IPSec) encryption

9.3Network Address Translation (NAT) for IP addresses

10.2Packet-triggered dynamic subscribers and policy control

(PTSP)

9.3Port Address Translation (PAT) for port numbers

9.3Real-time Performance Monitoring (RPM)

9.3Stateful firewall with packet inspection: detects SYN

attacks, ICMP and UDP floods, and ping-of-death attacks

Tunnel services:

9.3

•

GRE unicast tunneling-Supports GRE fragmentation

9.4

•

IP-IP unicast tunneling

9.4

•

Multicast tunneling

9.4

•

Protocol Independent Multicast (PIM) sparse mode

unicast tunneling

Protocols and Applications Supported by the Multiservices DPC (MS-DPC)