Datasheet

Maximum transmission units (MTUs) of up to 9192 bytes
Per-port SONET/SDH framing
Local and remote loopback on each port
Optical diagnostics and monitoring
Clocking options: internal or external/loop mode
Encapsulations:
MPLS fast reroute
MPLS CCC (circuit cross-connection)
MPLS TCC (translational cross-connection)
Cisco High-Level Data Link Control (cHDLC)
Cisco HDLC CCC
Cisco HDLC TCC
Point-to-Point Protocol (PPP)
PPP for CCC
PPP for TCC
Flexible Frame Relay
Frame Relay
Frame Relay for CCC
Frame Relay for TCC
PPP over Frame Relay
NOTE: Ethernet over Frame Relay is not supported.
Software features
Duplex LC/PC connector (Rx and Tx)
SONET/SDH OC3/STM1 small form-factor pluggable (SFP) transceivers:
Multimode (model number: SFP-OC3-SR)
Intermediate reach (IR-1) (model number: SFP-OC3-IR)
Long reach (LR-1) (model number: SFP-OC3-LR)
Optical interface specifications—see SONET/SDH OC3/STM1 Optical Interface Specifications
SONET/SDH OC12/STM4 small form-factor pluggable (SFP) transceivers:
Short reach (model number: SFP-OC12-SR)
Intermediate reach (IR-1) (model number: SFP-OC12-IR)
Long reach (LR-1) (model number: SFP-OC12-LR)
Long reach (LR-2) (model number: SFP-OC12-LR2)
Optical interface specifications—see SONET/SDH OC12/STM4 Optical Interface Specifications
Cables and
connectors
OK/FAIL LED, one bicolor:
Green—MIC is functioning normally
Yellow—MIC has failed
LINK LED, one green per port:
Off—Not enabled
Green—Online with no alarms or failures
Yellow—Online with alarms for remote failures
Red—Active with a local alarm; router has detected a failure
LEDs
133Copyright © 2012, Juniper Networks, Inc.
Channelized SONET/SDH OC3/STM1 (Multi-Rate) MICs with SFP