Datasheet

Table 10: Protocols and Applications Supported by the MX Series MPC3E (continued)
First Supported Junos OS ReleaseProtocol or Application
12.1MPLS:
•
Switching of pseudowire segments (multisegment pseudowires with
BGP-L2VPN)
•
LDP signaling for VPLS (LDP-VPLS) and MAC flush message processing
(MAC-FLUSH-TLV)
•
RSVP graceful restart interop with Cisco using Nodal Hello
•
Failure action on BFD session down of RSVP LSPs
•
OSPF and IS-IS loop-free alternates (LFA)
•
4/5 label MPLS operation
•
Virtual circuit connection verification (VCCV) BFD
•
VPLS instance prioritization
•
Pointto multipoint using the enhanced-ip command (support for NG-MVPN
and P2MP load balancing over aggregated Ethernet)
•
MPLS-FRR Bypass link protection
•
Load sharing across 64 ECMP next hops
•
MPLS-FRR VPLS instance prioritization
•
Supports five label stack on ingress
-MPLS node-protection, link-protection, and statistics for static LSPs
-Multiple VLAN Registration Protocol (MVRP)
12.1Multitopology routing
12.1Nonstop active routing (NSR)
12.1OSPF
12.1Packet mirroring
-Precision time protocol (IEEE 1588)
IEEE 802.1ah provider backbone bridges (PBB)
12.2Push a tag on Ethernet VPLS and Ethernet CCC tag encapsulations
12.1RSVP
12.1RIP
12.1SNMP
109Copyright © 2012, Juniper Networks, Inc.
Protocols and Applications Supported by the MX240, MX480, MX960 MPC3E