Datasheet

Moving the Mounting Brackets

For an open-frame rack, center-mounting is preferable, because the more even distribution

of weight provides greater stability. The router is shipped with the mounting brackets

already installed for front-mounting, as shown in Figure 1 on page 6.

To move the mounting brackets before center-mounting the router:

1. Move the mounting brackets to the center of the chassis.

2. Secure the mounting brackets to the chassis by installing screws along both the front

and rear of the brackets.

Documentation

• Installation Safety Warnings for Juniper Networks Devices on page 135

• Installing the M7i Router Into the Rack on page 49

M7i Multiservice Edge Router Hardware Guide