Datasheet

A fully configured router contains the router chassis with installed components, listed in
Table 11 on page 45, and an accessory box, which contains the parts listed in Table 12 on
page 45. The parts shipped with your router can vary depending on the configuration you
ordered.
Table 11: Generic Inventory of Router Components Installed in the M7i
Chassis
QuantityComponent
Up to 4PIC
1 (2-port Fast Ethernet or 1-port Gigabit
Ethernet)
FIC
1Routing Engine
1Midplane
1CFEB or CFEB-E
1Fan tray
1 or 2Power supply
2Mounting brackets
Depends on router configurationBlank panels for slots without components
Table 12: Accessory Box Parts List
QuantityPart
4Screws, Screw, Pan hd, Phil, 12-24 x 1/2", self-tapping
4Screws, Flat Hd, Phil, 5 x 10.5mm Long, 1.6mm Pitch,
self-tapping
2Terminal lugs, 16-AWG to 14-AWG, #6 stud, ring terminal,
vinyl insulated
9 (2 per power supply)Terminal fork lugs, 14-AWG, #6, 0.25 Wide, insulation
strain relieved, for DC power cables
2Terminal lugs, 14-AWG, #8 stud, ring tongue, insulated
1Terminal lugs, 14-AWG, two hole for grounding
1DB-9 (male) to DB-25 (female) serial adapter
1Serial cable, Console, DB9F/DB9F
45Copyright © 2012, Juniper Networks, Inc.
Chapter 6: Unpacking the M7i Router