Datasheet

Table 25: FIC Specifications (continued)
Router
Receptacle
Maximum
LengthCable Supplied
Cable
SpecificationInterface Type
LC6.2 mile/10 km
reach on 9/125
micrometer
single-mode
fiber (SMF)
NoDuplex LC1-port Gigabit
Ethernet FIC with
LX SFP
LC43.5 mile/70 km
reach on 8.2
micrometer SMF
NoDuplex LC1-port Gigabit
Ethernet FIC with
LH SFP
Related
Documentation
M7i PICs Description on page 16•
• M7i Fixed Interface Card (FIC) Description on page 15
• Connecting FIC and PIC Cables to the M7i Router on page 58
Fiber-Optic Specifications and Guidelines for the M7i Router
•
Fiber-Optic and Network Cable Specifications for the M7i Router on page 178
•
Signal Loss in Multimode and Single-Mode Fiber-Optic Cable for the M7i
Router on page 179
•
Attenuation and Dispersion in Fiber-Optic Cable on M Series, MX Series, and T Series
Routers on page 179
•
Calculating Power Budget for Fiber-Optic Cable for M Series, MX Series, and T Series
Routers on page 180
•
Calculating Power Margin for Fiber-Optic Cable for M Series, MX Series, and T Series
Routers on page 181
Fiber-Optic and Network Cable Specifications for the M7i Router
The router supports PICs that use various kinds of network cable, including multimode
and single-mode fiber-optic cable. For information about the type of cable used by each
PIC, see the M7i Multiservice Edge Router PIC Guide.
Related
Documentation
Signal Loss in Multimode and Single-Mode Fiber-Optic Cable for the M7i Router on
page 179
•
• Attenuation and Dispersion in Fiber-Optic Cable on M Series, MX Series, and T Series
Routers on page 179
• Calculating Power Budget for Fiber-Optic Cable for M Series, MX Series, and T Series
Routers on page 180
• Calculating Power Margin for Fiber-Optic Cable for M Series, MX Series, and T Series
Routers on page 181
Copyright © 2012, Juniper Networks, Inc.178
M7i Multiservice Edge Router Hardware Guide