Datasheet

You can view the SDRAM configuration and verify it was installed correctly by issuing
the show chassis routing-engine command, described in “Maintaining the M7i Routing
Engine” on page 76.
Figure 48: Installing the SDRAM Module
Related
Documentation
M7i Chassis Description on page 6•
• M7i Midplane Description on page 7
• Maintaining the M7i Routing Engine on page 76
Removing and Inserting the PC Card
The slot labeled PC CARD on the Routing Engine faceplate accepts a Type I PC card, as
defined in the PC Card Standard published by the Personal Computer Memory Card
International Association (PCMCIA). You can also copy Junos OS from the Routing Engine
onto a PC card, for example, to create a backup copy of upgrade software that you have
obtained from Juniper Networks. Instructions for copying software to a PC card are
available at the Juniper Networks Customer Support Center Web site
(http://www.juniper.net/support); after logging in, navigate to the download page for
Junos OS.
To remove and insert a PC card, perform the following procedures:
•
Removing the PC Card on page 110
•
Replacing the PC Card Adapter Flash Disk on page 110
•
Inserting the PC Card on page 111
109Copyright © 2012, Juniper Networks, Inc.
Chapter 15: Replacing M7i Hardware Components