Datasheet

1-Port SFP Mini-Physical Interface Module Hardware Specifications
Table 30 on page 74 gives the physical specifications of the 1-Port Small Form-Factor
Pluggable Mini-Physical Interface Module (SFP Mini-PIM).
Table 30: 1-Port SFP Mini-PIM Physical Specifications
ValueDescription
0.80 in. x 3.75 in. x 5.9 in.
(2.0 cm x 9.5 cm x 14.5 cm )
Dimensions (H x W x L)
3.36 oz (95 g)Weight
SFPConnector type
Mini-PIMForm factor
Related
Documentation
1-Port SFP Mini-Physical Interface Module Network Interface Specifications on page 74•
• 1-Port SFP Mini-Physical Interface Module Supported Modules on page 75
• 1-Port SFP Mini-Physical Interface Module Key Features on page 76
• 1-Port SFP Mini-Physical Interface Module LEDs on page 77
• 1-Port SFP Mini-Physical Interface Module Basic Configuration on page 78
1-Port SFP Mini-Physical Interface Module Network Interface Specifications
Table 31 on page 74 gives the network interface specifications of the 1-Port Small
Form-Factor Pluggable Mini-Physical Interface Module (SFP Mini-PIM).
Table 31: 1-Port SFP Mini-PIM Network Interface Specifications
1-Port SFP SpecificationSpecifications
Full-duplex and half-duplexOperating modes
802.1q virtual LANsVLAN support
SupportedClass-of-service support
DIX, LLC/SNAP, CCC, TCC, and VLAN-CCCEncapsulations
SupportedLoopback diagnostic feature
Related
Documentation
1-Port SFP Mini-Physical Interface Module Overview on page 73•
• 1-Port SFP Mini-Physical Interface Module Hardware Specifications on page 74
• MTU Default and Maximum Values for Physical Interface Modules on page 10
Copyright © 2012, Juniper Networks, Inc.74
SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide