Datasheet
Table 25: 1-Port G.SHDSL 8-Wire Mini-PIM Physical
Specifications (continued)
ValueDescription
–40°F through 158°F (–40°C through 70°C)Storage temperature
5% to 90% noncondensingRelative humidity
Related
Documentation
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Overview on page 59•
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Supported Standards on page 60
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Operating Modes on page 60
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Key Features on page 61
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module LEDs on page 63
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module LEDs
The 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module (Mini-PIM) has the following
LEDs to indicate the state of the Mini-PIM and its four ports (one LED for each port).
Table 26 on page 63 describes the LED states.
Table 26: 1-Port G.SHDSL Mini-PIM LED States
DescriptionStateColorName
Port is online with no alarms or failuresOnGreenSTATUS
Port is initializingOnAmber
Port has detected an alarmOnRed
Link is activeOnGreenLINK
NOTE: There are four
LINK LEDs available
on the G.SHDSL
Mini-PIM. Each LED
provides the link
status of the wire pair.
Data communication is taking placeBlinking
Link is inactiveOff
Related
Documentation
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Overview on page 59•
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Supported Standards on page 60
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Operating Modes on page 60
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Key Features on page 61
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Hardware Specifications on
page 62
63Copyright © 2012, Juniper Networks, Inc.
Chapter 6: 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module