Datasheet

Related
Documentation
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Supported Standards on page 60•
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Operating Modes on page 60
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Key Features on page 61
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Hardware Specifications on
page 62
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module LEDs on page 63
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Supported Standards
The 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module (Mini-PIM) complies with
the following standards:
•
ITU-T G.991.2—Symmetric high-speed digital subscriber line (SHDSL) transceiver
•
ITU-T G.994.1—Handshake procedures for digital subscriber line (DSL) transceivers (3
LC Comment)
•
ITU-T G.997.1—Physical layer management for DSL transceivers
Related
Documentation
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Overview on page 59•
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Operating Modes on page 60
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Key Features on page 61
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Hardware Specifications on
page 62
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module LEDs on page 63
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Operating Modes
The 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module (Mini-PIM) can be configured
to operate in the following modes:
•
4X2-wire (4-port 2-wire)
•
2X4-wire (2-port 4-wire)
•
1X8-wire (1-port 8-wire)
NOTE: The 4-wire mode is the default operating mode for the 1-Port
G.SHDSL 8-Wire Mini-PIM.
The 1-Port G.SHDSL 8-Wire Mini-PIM can operate in any of the following annexes:
•
Annex A
•
Annex B
Copyright © 2012, Juniper Networks, Inc.60
SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide