Datasheet

• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Hardware Specifications
on page 50
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Network Interface
Specifications on page 51
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Key Features on page 53
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module LEDs on page 54
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Basic Configuration on
page 54
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Key Features
The 1-Port Gigabit Ethernet Small Form-Factor Pluggable Mini-Physical Interface Module
(SFP Mini-PIM) has the following key features:
•
Supports hot-swappable transceivers
•
Real-time visual status of connectivity and traffic flows
•
Provides Link Up/Down alarm
•
Half-duplex/full-duplex support
•
Autonegotiation
NOTE: We strongly recommend the use of Juniper Networks transceivers.
We cannot guarantee correct operation if other transceivers are used. The
transceiver type can be different in each port, as long as a supported part
number is used.
Related
Documentation
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Overview on page 49•
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Hardware Specifications
on page 50
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Network Interface
Specifications on page 51
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Supported Modules on
page 51
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module LEDs on page 54
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Basic Configuration on
page 54
53Copyright © 2012, Juniper Networks, Inc.
Chapter 5: 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module