Datasheet

Table 22: Supported 1-Port Gigabit Ethernet SFP Mini-Physical Interface
Modules
Cable
Connector Type (SFP
Transceiver)Juniper Product Number
LC100BASE-FXJX-SFP-1FE-FX
LC1000BASE-LH (ZX)JX-SFP-1GE-LH
LC1000BASE-LXJX-SFP-1GE-LX
LC1000BASE-SXJX-SFP-1GE-SX
CAT-5eTri-Rate 10/100/1000BASE-T,
Copper Transceiver
JX-SFP-1GE-T
LC1000BASE-BX10, at 10 km
(TX1310 nm / RX1490 nm)
SFP-GE10KT13R14
LC1000BASE-BX10, at 10 km
(TX1310 nm / RX1550 nm)
SFP-GE10KT13R15
LC1000BASE-BX10, at 10 km
(TX1490 nm / RX1310 nm)
SFP-GE10KT14R13
LC1000BASE-BX10, at 10 km
(TX1550 nm / RX1310 nm)
SFP-GE10KT15R13
LC1000BASE-BX, at 40 km (TX1310
nm / 1550 nm)
SFP-GE40KT13R15
LC1000BASE-BX, at 40 km(TX1550
nm / RX1310 nm)
SFP-GE40KT15R13
LC100Base-BX Fast Ethernet Optics,
at 20 km (TX 1310 nm / RX 1550
nm)
EX-SFP-FE20KT13R15
LC100Base-BX Fast Ethernet Optics,
at 20 km (TX 1550 nm / RX 1310
nm)
EX-SFP-FE20KT15R13
NOTE: We strongly recommend the use of Juniper Networks transceivers.
We cannot guarantee correct operation if other transceivers are used. The
transceiver type can be different in each port, as long as a supported part
number is used.
Related
Documentation
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Overview on page 49•
Copyright © 2012, Juniper Networks, Inc.52
SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide