Datasheet

Table 16: 1-Port ADSL2+ Mini-PIM LED States
DescriptionStateColorLED
Indicates that the ADSL interface is trainedOnGreenSYNC
Indicates training is in progressBlinking
Indicates that the interface is idleOff
Indicates that traffic is passing throughBlinkingGreenTX/RX
Indicates that no traffic is passing throughOff
Related
Documentation
1-Port ADSL2+ Mini-Physical Interface Module Overview on page 33•
• 1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications on page 34
• 1-Port ADSL2+ Mini-Physical Interface Module Network Interface Specifications on
page 35
• 1-Port ADSL2+ Mini-Physical Interface Module Supported Standards on page 36
• 1-Port ADSL2+ Mini-Physical Interface Module Key Features on page 37
• 1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback Diagnostics on
page 38
• 1-Port ADSL2+ Mini-Physical Interface Module Basic Configuration on page 39
1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback Diagnostics
The 1-Port ADSL2+ Mini-Physical Interface Module (Mini-PIM) provides the following
Operation, Administration, and Maintenance (OAM) loopback diagnostics:
•
OAM F4 far loopback test
•
OAM F4 near loopback test
•
OAM F5 far loopback test
•
OAM F5 near loopback test
Related
Documentation
1-Port ADSL2+ Mini-Physical Interface Module Overview on page 33•
• 1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications on page 34
• 1-Port ADSL2+ Mini-Physical Interface Module Network Interface Specifications on
page 35
• 1-Port ADSL2+ Mini-Physical Interface Module Supported Standards on page 36
• 1-Port ADSL2+ Mini-Physical Interface Module Key Features on page 37
• 1-Port ADSL2+ Mini-Physical Interface Module LEDs on page 37
Copyright © 2012, Juniper Networks, Inc.38
SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide