Datasheet

CHAPTER 2
Installing and Removing Interfaces on the
SRX Series Services Gateway
This chapter includes the following topics:
•
Replacing a Mini-Physical Interface Module in the SRX Series Services
Gateway on page 17
•
Replacing a Gigabit-Backplane Physical Interface Module in the SRX Series Services
Gateway on page 22
Replacing a Mini-Physical Interface Module in the SRX Series Services Gateway
This topic includes the following sections:
•
Required Tools and Parts for Replacing a Mini-Physical Interface Module on page 17
•
Removing a Blank Mini-Physical Interface Module Faceplate from the SRX Series
Services Gateway on page 18
•
Installing a Mini-Physical Interface Module in the SRX Series Services
Gateway on page 19
•
Removing a Mini-Physical Interface Module from the SRX Series Services
Gateway on page 20
Required Tools and Parts for Replacing a Mini-Physical Interface Module
The following tools and parts are required for replacing Mini-Physical Interface Modules
(Mini-PIMs) on the SRX Series Services Gateway:
•
Electrostatic bag or antistatic mat, for each component
•
Electrostatic discharge (ESD) grounding wrist strap
•
Flat blade (–) screwdriver, approximately 1/8 in. (3 mm)
•
Phillips (+) screwdrivers, number 1
Related
Documentation
Removing a Blank Mini-Physical Interface Module Faceplate from the SRX Series
Services Gateway on page 18
•
• Installing a Mini-Physical Interface Module in the SRX Series Services Gateway on
page 19
17Copyright © 2012, Juniper Networks, Inc.