Datasheet

Documentation

SRX Series Services Gateway Mini-Physical Interface Modules Overview on page 4•

• SRX Series Services Gateway Gigabit-Backplane Physical Interface Modules Overview

on page 5

• Supported SRX Series Services Gateway Interfaces on page 7

SRX Series Services Gateway Mini-Physical Interface Modules Overview

A Mini-Physical Interface Module (Mini-PIM) is a network interface card (NIC) that is

installed on the SRX Series Services Gateway to provide physical connections to a LAN

or a WAN. The Mini-PIM receives incoming packets from the network and transmits

outgoing packets to the network.

Table 3 on page 4 lists the Mini-PIMs and their model numbers.

Table 3: SRX Series Services Gateway Mini-PIMs Model Numbers

Model NumbersMini-PIMs

SRX-MP-1SFP1-Port Small Form-Factor Pluggable (SFP)

SRX-MP-1SFP-GE1-Port Gigabit Ethernet Small Form-Factor

Pluggable (SFP)

SRX-MP-1ADSL2-A (Annex A)

SRX-MP-1ADSL2-B (Annex B)

ADSL2+

SRX-MP-1DOCSIS3DOCSIS

SRX-MP-8GSHDSLG.SHDSL

SRX-MP-1SerialSerial

SRX-MP-1T1E1T1/E1

SRX-MP-1VDSL2-A (Annex A)VDSL2 (Annex A)

The Mini-PIMs supported on the SRX Series Services Gateway are field-replaceable. You

can install a Mini-PIM into the Mini-PIM slot on the front panel of the services gateway

chassis.

CAUTION: The Mini-PIMs available on the SRX Series Services Gateway are

not hot-swappable. You must power off the device before removing or

installing Mini-PIMs.

Documentation

Supported SRX Series Services Gateway Interfaces on page 7•

• SRX Series Services Gateway Interfaces Models and Compatibility on page 8

SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide