Datasheet

• Power over Ethernet Support on SRX Series Services Gateway Interfaces on page 12
16-Port Gigabit Ethernet XPIM Components
The 16-Port Gigabit Ethernet XPIM contains the components listed in Table 55 on page 135.
Table 55: 16-Port Gigabit Ethernet XPIM Components
DescriptionLocationComponent
Use the XPIM
ONLINE/OFFLINE button to
gracefully shut down the XPIM.
Right side of the XPIMXPIM ONLINE/OFFLINE button
Only SRX650 Services
Gateway supports
hot-swappable functionality
for GPIMs.
NOTE: Each port on the
16-Port Gigabit Ethernet with
PoE XPIM supports Power over
Ethernet (PoE).
Each Gigabit Ethernet port:
•
Provides link speeds of
10/100/1000 Mbps
•
Uses an RJ-45 connector
•
Operates in full-duplex and
half-duplex modes
•
Supports flow control
•
Supports autonegotiation
Middle of the XPIM16 fixed Gigabit Ethernet ports
labeled 0 to 15
NOTE: The 16-Port Gigabit
Ethernet with PoE XPIM port
labels are yellow instead of
white.
Use the captive screws to hold
the XPIM in place in the
services gateway.
One on each side of the XPIMCaptive screws
Use the handles to grasp the
XPIM for installation or
removal.
One on each side of the XPIMHandles
Related
Documentation
16-Port Gigabit Ethernet XPIM Overview on page 131•
• 16-Port Gigabit Ethernet XPIM Key Features on page 132
• 16-Port Gigabit Ethernet XPIM Hardware Specifications on page 133
• 16-Port Gigabit Ethernet XPIM LEDs on page 133
• 16-Port Gigabit Ethernet XPIM Basic Configuration on page 136
• Power over Ethernet Support on SRX Series Services Gateway Interfaces on page 12
135Copyright © 2012, Juniper Networks, Inc.
Chapter 14: 16-Port Gigabit Ethernet XPIM