Datasheet

• 8-Port Serial GPIM Basic Configuration on page 126
8-Port Serial GPIM Network Interface Specifications
Table 49 on page 121 lists the network interface specifications of the 8-Port Serial
Gigabit-Backplane Physical Interface Module (GPIM).
Table 49: 8-Port Serial GPIM Network Interface Specifications
SpecificationDescription
Network Interface Specifications
NRZ and NRZILine encoding
•
EIA-530
•
EIA-530A
•
EIA-449
•
RS-232
•
V.35
•
X.21
Line Protocols
•
Data terminal equipment (DTE)
•
Clear to send (CTS)
•
Data carrier detect (DCD)
•
Data set ready (DSR)
•
Data circuit-terminating equipment (DCE)
•
Request to send (RTS)
•
Data terminal ready (DTR)
Modes
Up to 8 MbpsSynchronous Tx/Rx rate/port
rx_error_counts, tx_abort_counts, rx_giant_counts,
rx_runt_counts, and crc_err_counts
Error counters
HDLC Features
56K or 64KMode
SupportedPPP, Frame Relay, and Cisco-HDLC
encapsulation
SupportedShared flag
SupportedIdle flag/fill (0x7e or all ones)
Runts, giants, fcs error, abort error, and align errorCounters
Related
Documentation
8-Port Serial GPIM Overview on page 119•
• 8-Port Serial GPIM Hardware Specifications on page 120
121Copyright © 2012, Juniper Networks, Inc.
Chapter 13: 8-Port Serial GPIM