Datasheet

Table 42: 1-Port Clear Channel DS3/E3 GPIM LED States (continued)
DescriptionStateColorLED
Port is receiving remote defect
indication (RDI) alarm.
OnAmberRDI
There are no alarms or defects.OnGreenALARM
An alarm or a defect is present.OnRed
Out-of-frame (OOF) RX
multi-frame is not aligned.
OnAmberOOF
Related
Documentation
1-Port Clear Channel DS3/E3 GPIM Overview on page 97•
• 1-Port Clear Channel DS3/E3 GPIM Hardware Specifications on page 98
• 1-Port Clear Channel DS3/E3 GPIM Network Interface Specifications on page 99
• 1-Port Clear Channel DS3/E3 GPIM Supported Standards on page 101
• 1-Port Clear Channel DS3/E3 GPIM Key Features on page 101
• 1-Port Clear Channel DS3/E3 GPIM Components on page 103
• 1-Port Clear Channel DS3/E3 GPIM Supported Loopback Diagnostics on page 104
• 1-Port Clear Channel DS3/E3 GPIM Basic Configuration on page 105
1-Port Clear Channel DS3/E3 GPIM Components
The 1-Port Clear Channel DS3/E3 GPIM contains the components listed in Table 43 on
page 103.
Table 43: 1-Port Clear Channel DS3/E3 GPIM Components
DescriptionLocationComponent
Use the ONLINE/OFFLINE
button to gracefully shut down
the GPIM. Press down and hold
the button for 4 to 5 seconds;
then release. The GPIM
gracefully shuts down and
turns off the power supply
units (PSUs).
To power up the GPIM (if the
Services and Routing Engine
[SRE] is off), press and hold
the ONLINE/OFFLINE button
for 4 to 5 seconds.
Right side of the GPIMONLINE/OFFLINE button
Only SRX650 Services
Gateway supports
hot-swappable functionality
for GPIMs.
103Copyright © 2012, Juniper Networks, Inc.
Chapter 11: 1-Port Clear Channel DS3/E3 GPIM