Datasheet

Table 38: 1-Port VDSL2 (Annex A) Mini-PIM Hardware Specifications
ValueDescription
3.75 in. x 5.9 in. x 0.80 in.
(9.5 cm x 14.5 cm x 2.0 cm)
Dimensions (H x W x L)
4.0 oz (114 g)Weight
RJ-11Connector type
Mini-PIMForm factor
32°F through 113°F (0°C through 45°C)Environmental operating temperature
–40°F through 158°F (–40°C through 70°C)Storage temperature
5% to 90% noncondensingRelative humidity
Related
Documentation
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Overview on page 89•
• 1-Port VDSL2 (Annex A) Mini-Physical Interface Module Key Features on page 90
• 1-Port VDSL2 (Annex A) Mini-Physical Interface Module Supported Profiles on page 91
• 1-Port VDSL2 (Annex A) Mini-Physical Interface Module LEDs on page 92
• 1-Port VDSL2 (Annex A) Mini-Physical Interface Module Cable Specifications on page 192
• 1-Port VDSL2 (Annex A) Mini-Physical Interface Module Basic Configuration on page 93
1-Port VDSL2 (Annex A) Mini-Physical Interface Module LEDs
The 1-Port VDSL2 (Annex A) Mini-Physical Interface Module (Mini-PIM) has two LEDs.
Table 39 on page 92 describes the LED states.
Table 39: 1-Port VDSL2 (Annex A) Mini-PIM LED States
DescriptionStateColorLED
Indicates that the VDSL interface is trained.OnGreenSYNC
Indicates training is in progress.Blinking
Indicates that traffic is passing through.BlinkingGreenTX/RX
Indicates that no traffic is passing through.Off
Related
Documentation
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Overview on page 89•
• 1-Port VDSL2 (Annex A) Mini-Physical Interface Module Key Features on page 90
• 1-Port VDSL2 (Annex A) Mini-Physical Interface Module Supported Profiles on page 91
Copyright © 2012, Juniper Networks, Inc.92
SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide