Datasheet

Table 35: 1-Port T1/E1 Mini-PIM Network Interface
Specifications (continued)
E1 SpecificationsT1 SpecificationSpecification
2.048 Mbps1.544 MbpsTransmit bit rate
2.048 Mbps1.544 MbpsReceive bit rate
HDB3AMI/B8ZSLine encoding
Framed Clear Channel,
Unframed Clear Channel
Framed Clear ChannelMode
G704 without CRC4 UnframedSuperframe (D4/SF), Extended
Superframe (ESF)
Fractional Framing
HDLC features
(E1:N=1 to 31)(T1:N=1 to 24)N x 64 Kbps or N x 56 Kbps,
nonchannelized data rates
16/3216/32CRC
SupportedSupportedShared Flag
SupportedSupportedIdle flag/fill
Runts, Giants, FCS, Error, Abort
Error, Align Error
Runts, Giants, FCS, Error, Abort
Error, Align Error
Counters:
Related
Documentation
1-Port T1/E1 Mini-Physical Interface Module Overview on page 81•
• 1-Port T1/E1 Mini-Physical Interface Module Hardware Specifications on page 82
• 1-Port T1/E1 Mini-Physical Interface Module Supported Standards on page 83
• 1-Port T1/E1 Mini-Physical Interface Module Key Features on page 84
• 1-Port T1/E1 Mini-Physical Interface Module LEDs on page 84
• 1-Port T1/E1 Mini-Physical Interface Module Supported Loopback Diagnostics on page 85
• 1-Port T1/E1 Mini-Physical Interface Module Basic Configuration on page 86
1-Port T1/E1 Mini-Physical Interface Module Supported Standards
The 1-Port T1/E1 Mini-Physical Interface Module (Mini-PIM) supports the following
standards:
•
ANSI TI.107, TI.102
•
GR 499-core, GR 253-core
83Copyright © 2012, Juniper Networks, Inc.
Chapter 9: 1-Port T1/E1 Mini-Physical Interface Module