User guide
RTK GPS Expansion Pack 7
Attaching the Expansion Pack to the Handheld
Follow these instructions to aach the RTK GPS
Expansion Pack to the handheld:
1. Power o the handheld by holding down the power
buon for a few seconds and selecting Power O
from the Power Buon menu.
2. Loosen the top four
screws on the back
of the handheld as
shown.
3. Remove the cover
and screws from
the handheld. (The
cover is not used
with the pack.
Place the cover and
screws someplace where you can nd them in the
future.)
4. Slide the top of the hand strap up to detach it from
the back. Remove the boom of the hand strap. (The
hand strap is not used with the pack. Place the hand
strap someplace where you can nd it in the future.)
5. Place the RTK GPS Expansion Pack on the back of the
handheld and insert the four screws included with it.
6. Tighten the screws to aach the pack.