Owner's Manual

4 Mesa 3 Rugged Tablet Powered by Android
Perform Initial Tasks
When you receive your Mesa 3, perform the tasks outlined in
this section before rst use.
Review Documentation
This owner’s manual and other documents like release
notes are available on our website at: www.junipersys.com/
support/mesa-3/documentation. View, download, and
print documents as desired, either on the Mesa 3 or another
computer with an internet connection.
Documentation will be updated during the life of the Mesa
3. Compare version numbers on the inside cover to see if a
document has changed.
Install the Battery Pack, Micro SD Card, and Micro SIM
Card
The Mesa 3 comes with a rechargeable, removable Li-
Ion battery pack. Install and charge the battery pack as
follows:
1. The battery compartment is accessed from the back of
the tablet. Push the battery lock switch in, slide it to the
unlocked position, and remove the door.
CAUTION: The Mesa 3 is not sealed against water and
dust when the battery door is not installed.
2. If you are using a micro SD card for additional memory
or a micro SIM card for cellular data, you can install
them now before you install the battery pack or at
another time. If you do this, make sure you replace the
exible card retainer before installation of the battery.
See Chapter 2, Standard Features, SD Cards for more
details.
!