Owner's Manual
Table Of Contents
Chapter 2 Standard Features 11
Touchscreen Touch Control Setting
You can select the prole you want the screen optimized
for based on the environment you are working in and your
personal preference. Proles choices include: Finger, Stylus
or Finger, Glove, Stylus, or Wet. You can try different proles
to see which one works best for the conditions the Mesa 3 is
being used in.
To adjust the Touch Control setting, swipe down from the
top twice to see all of the Quick Settings and tap and hold
Touch Settings. Make a selection from the list of options that
is shown. You can also go to Settings > Touch Control.
Wet Conditions
When using the Mesa 3 in wet conditions, you must use your
nger or the soft-tipped stylus that is included, even after
selecting the Wet Touch Control prole. The hard-tipped
stylus is not supported with this prole. Third party styli might
work with the Mesa 3 touchscreen. However, third party styli
performance may vary.
Touchscreen Enable/Disable
There are times when you might want to disable the
touchscreen (so selections are not inadvertently made,
for example). A keypad button can be set up to provide
this function. Go to Settings > Keypad. Select Advanced
to see all of the keys. Select the key you want to use. A list
of options is shown for that key (scroll up and down to see
them all). Select Touchscreen enable/disable.
Keypad Features
The Mesa 3 keys (buttons) are sealed and have backlight
illumination. They are programmable. The standard
functions are shown in the following chart:
Key Function
Back
Home
App Select
Volume -