Owner's Manual

38 Mesa 3 Rugged Tablet Owner’s Manual
Pistol Grip
The Pistol Grip is designed to reduce strain and maximize
productivity in heavy barcode scanning applications.
How to Use the Pistol Grip
1. Place the Mesa 3 with the back facing up.
2. Line up the three screw holes and contacts on the Pistol
Grip with these items on the Mesa 3.
3. Use the three screws included with the Pistol Grip to
attach it to the Mesa 3.
4. Use the Barcode Connector software discussed earlier
in this chapter as described.
5. The trigger has two stages. Pull it halfway back to
turn the laser on and aim the barcode imager at the
barcode. Pull it back fully to read the barcode.
Note: The Pistol Grip does not work with the RFID reader. It is
rugged, but does not meet IP68 standards.
Holster
There is an optional nylon holster for this system that you can
attach to a belt or shoulder strap.