Owner's Manual

32 Mesa 3 Rugged Tablet Owner’s Manual
Home Screen
From the home screen, select your preferred Startup option.
You can also do a Scan Test with the current settings. Tap
the menu symbol at the top left to minimize the menu
Note: When you do a Scan Test, tap the Scan button on the
screen. You can also use the scan button on the Mesa 3 (P2
is the default). Put the cursor in the Scan Data box rst. After
a successful scan, the Barcode Scan Symbology and Scan
Data are shown on the screen.
Barcode Setup
Select the menu symbol in the upper left hand corner. From
this menu, select User to set up the User Settings. From this
screen, set up options like which button you would like to
use to scan barcodes (P2 is the default).